Tyre Inflators

• Housed in rugged composite case. • Suitable for inflating tyres on cars, vans and 4x4s. • Powered by reliable, heavy-duty, fuse protected motor compressing free air to 30psi at the rate of 45ft³/hr. • Integral gauge reads up to 20bar/300psi. • Supplied with plug for use in cigarette lighter socket. • Accessory kit, containing Presta type adaptor, ball spike and two inflatables adaptors included in storage compartment on base.

• Compact and portable design. • Features LCD read-out with 3-position switch for automatic and manual operation. • Simple operation enables desired pressure to be preset. • Compressor simply stops when desired pressure is achieved. • Compresses free air to 30psi at the rate of 40ft³/hr. • Integral gauge reads up to 17bar/250psi. • Automatic mode up to 100psi. • Storage on underside of compressor for cables, hose and accessory kit. • Supplied with plug for use in cigarette lighter socket, ball spike and inflatables adaptor.

Multi-functional compressor with flash light/torch beam and pressure gauge (guide only). For the inflating of tyres, dinghies and sports equipment. Powered by cigarette lighter socket. Supplied with 12V DC car cigarette lighter plug on 3M long (approx.) lead, two inflating adaptor nozzles, one needle valve adaptor and hose clip-on tyre adaptor. Display carton.

• Composite body and dial type jumbo gauge with rubber protector. • Calibrated in bar and psi. • Fitted with 400mm rubber hose and single clip-on connector.

• Composite body and dial type jumbo gauge with rubber protector. • Calibrated in bar and psi. • Fitted with 400mm rubber hose and single push-on connector.

• 12Volt Mini air compressor with delivery of 25ltr/min. • Integral storage for supply lead and air output hose. • Features work light for use in low light areas. • Light can also be set to flash for emergency use. • Pressure gauge reads up to 8bar/120psi. • Suitable for inflating tyres on cars, vans and 4x4's.

Professional quality airline gauge with twin hold on valve connector. Suitable for inflating car and light commercial tyres. The MK3 professional airline gauge has become an industry standard in tyre shops, garages and transport depots to petrol forecourts and is recognised by operators and tyre fitters alike as a reliable high performance tyre inflation device. Manufactured in the UK, by PCL to the highest quality standards. Reduced operating costs with fast inflation and deflation rates Long life excellent shock resistance with robust durable design and construction High versatility - suitable for indoor and outdoor enviroments, commercial and retail applications Guaranteed accuracy - complies with BS EN 12645:1999 and EC Directive 86/217/EEC Easy to install - full instructions supplied with each gauge Individually tested - each unit has a unique serial number and is supplied with a Certificate of Calibration New valve design increasing inflation sped (500 1/min @ 13 bar supply) Cast aluminium body Proven linear spring gauge Magnified clear linear gauge display bar, lbf/in² and kPa calibrations and a large range of options and accessories High pressure model with inflation pressure up to 21 bar / 300 lbf/in° Comes new, boxed and supplied with calibration certificate

• Manufactured to comply with EU Directive 86/217. • Extruded aluminium body with large rubber bumper. • Linear pressure scale, dual calibrated in psi and bar. • Fitted with 2.75mtr hose with clip-on connector for compliance with safety regulations relating to inflation of commercial and agricultural vehicle tyres. • Supplied with a serial numbered calibration certificate.

• Composite body and dial type gauge with rubber protector. • Fitted with 500mm rubber hose and single clip-on connector.

• Composite body and dial type gauge with rubber protector. • Calibrated in bar/psi. • Fitted with 500mm rubber hose and single clip-on connector.

• Manufactured to comply with 86/217/EEC Measuring Instruments Directive. • Extruded aluminium body with large rubber bumper. • Linear pressure scale, dual calibrated in psi and bar, with parallax correction. • 300mm Flexible hose fitted with 240mm, twin push-on, air connector. • Supplied with a serial numbered calibration certificate.

• Composite body and dial type gauge with rubber protector. • Fitted with 500mm rubber hose and twin push-on connector.

• Die-cast body and dial type gauge with rubber protector. • Fitted with single clip-on connector.

• Die-cast body and dial gauge with rubber protector. • Fitted with single clip-on connector. • Supplied with quick coupling.