You are here: Automotive & Service Tools > Brake Servicing Tools > Brake Caliper, Disc, Drum & Pad Tools
Automatic Brake & Clutch Bleeder
Fast, easy and effective bleeding of brakes and clutch using air from tyre. Innovative design incorporates valve for control of air pressure, extra-long air hose for use with larger vehicles and magnetic reservoir base to prevent accidental spillage. Suitable for use with ABS systems. Supplied with range of common adaptors.
£15.09 ex. VAT
£18.11 inc. VAT
Brake Calliper Socket Set 3pc 1/2"Sq Drive
Chrome Vanadium steel 1/2"Sq drive sockets. Suitable for the adjustment and installation of Bendix and Girling brakes. Supplied in case for ease of storage.
£9.03 ex. VAT
£10.84 inc. VAT
Brake Calliper Socket Set 5pc 1/2"Sq Drive
Chrome Vanadium steel 1/2"Sq drive sockets. Updated set contains pentagon sockets and bit suitable for the adjustment and installation of Bendix and Girling brakes.
£12.35 ex. VAT
£14.82 inc. VAT
Brake Calliper Thread Repair Kit
Time and money saving kit for replacing damaged brake calliper threads with a new threaded insert. Features three alignment plates for correct alignment of the insert. Kit includes 7mm hex key, stepped drill, M9 tap and ten inserts in carry-case.
£43.55 ex. VAT
£52.26 inc. VAT
Brake Calliper Thread Repair Kit M12 x 1.5mm
Quick and effective method of replacing brake calliper threads using M12 x 1.5mm inserts. Stepped drill allows you to oversize the hole allowing insert to be fitted. Features one alignment plate for precision drilling for new insert. Kit includes M12 x 1.5mm tap, step drill, insert locator, two washers with centre roller bearing and ten replacement inserts in storage case.
£52.88 ex. VAT
£63.46 inc. VAT
Brake Disc & Lining Cleaner 15ltr
Reduce the chances of brake dust getting airborne and help protect you and your workforce from the effects of brake dust inhalation. Air operated brake cleaner device can be used remotely from air supply and its recycling function prolongs the life of the brake cleaning fluid. Cranked neck makes this unit suitable for use under lift or next to ramps. Fitted with four large castors for workshop mobility. Simple to fill and empty. Suitable for use with proprietary brands of brake cleaning fluid. Supplied with cleaning brush.
£697.98 ex. VAT
£837.58 inc. VAT
Brake Disc Calliper 0-50mm
Stainless steel calliper suitable for accurate measurement of brake disc thickness. Floating jaw assembly enables easy removal of calliper from disc while retaining reading. Metric scale with 0.1mm graduations. Supplied in storage case.
£22.90 ex. VAT
£27.48 inc. VAT
Brake Disc Calliper 0-56mm with Tyre Tread Dept...
Unique lever action floating jaw assembly enables easy removal of calliper from disc while retaining reading. Ideal on discs that have a wear lip. Features a tyre tread depth gauge at the base of the calliper and scale lock. Metric scale with 0.1mm graduations.
£13.19 ex. VAT
£15.83 inc. VAT
Brake Disc Run-Out Kit
Check for ball joint wear and brake disc run-out quickly and easily. Locking pliers secure to any convenient position enabling DTI gauge to be placed against brake disc. Kit includes Metric calibrated DTI gauge.
£48.39 ex. VAT
£58.07 inc. VAT
Brake Drum Wear Gauge
Measures drum wear to ensure within manufacturers tolerance. Also aids quick set-up of shoe/drum clearance prior to re-installation of drum. Measures drums from 165 to 292mm (6-1/2" to 11-1/2"). Dual Imperial and Metric scale. Knurled locking action.
£15.87 ex. VAT
£19.04 inc. VAT
Brake Pad Thickness Gauge
Ingenious time saving tool and essential for any garage. Measures the brake pad the on vehicle without removing the road wheel. Slim design enables the tool to locate the rear of the pad backing plate, allowing the probe to measure the distance between the underside of the backing plate and brake disc. Suitable for both internal and external brake pads and features a 1.5mm and calibration check marking. Designed for brake pads that have a normal 6mm thick backing plate (Class IV, V).
£12.20 ex. VAT
£14.64 inc. VAT
Brake Pad Thickness Gauge 8pc
Ideal for quickly checking the thickness of the brake pad lining. Colour-coded blades fit between the disc and brake pad backing plate. Dual marked in Metric and Imperial.
£9.97 ex. VAT
£11.96 inc. VAT
Brake Piston Cube 3/8"Sq Drive
Suitable for vehicles with discs all round. Retracts parking brake piston prior to installation of new pads. Five possible pin configurations, fit US and European applications. Use with 3/8"Sq drive ratchet wrench and extension bar. Warning: Not for use with impact type ratchets.
£6.34 ex. VAT
£7.61 inc. VAT
Brake Service Kit
Kit contains the majority of tools required to carry out servicing/repair work on disc and drum brakes. This handy kit is supplied in a carry-case to keep these commonly used tools together and is ideal for the busy workshop.
£24.32 ex. VAT
£29.18 inc. VAT
Brake Shoe Adjuster
Designed for use on hydraulic braking systems. Adjusts the clearance between the brake drum and shoe. May be used to lever the brake shoe to adjust the mechanical adjuster or through slots in the backing plate to turn the star wheel type adjuster. Suitable for cars and light commercials.
£6.42 ex. VAT
£7.70 inc. VAT
Brake Shoe Spreader - Volvo Truck
Locks the brake shoe open allowing the shoe lining to be replaced. A must have tool for servicing front and rear brakes on Volvo trucks.
£86.33 ex. VAT
£103.60 inc. VAT
Brake Shoe Spring Hook Tool
Manufactured from heat treated alloy steel. Specifically designed for installation and removal of drum brake shoe springs.
£5.37 ex. VAT
£6.44 inc. VAT
Brake Shoe Spring Pliers
Purpose made for the installation and removal of drum shoe return springs. Can also be used for removal/installation of spring from anchor stud. Suitable for most car and light commercial drum brakes.
£5.70 ex. VAT
£6.84 inc. VAT
Brake Spring Pliers - Commercial
Designed for the removal/installation of drum shoe retaining springs, found on commercial vehicles.
£42.41 ex. VAT
£50.89 inc. VAT
Brake Spring Washer Pliers
Designed to aid installation and removal of brake shoe retaining spring washers, found in drum brake assemblies. Spring loaded, offset jaws enable easy access to spring washer located behind wheel hubs. Suitable for cars and light commercial vehicles.
£17.96 ex. VAT
£21.55 inc. VAT
Brake Spring Washer Tool Double End
Designed to aid installation and removal of large and small T-slot anti-rattle washers found in drum brake assembly. Features large viewing cut-away to allow correct alignment of washer. Simple push and twist action.
£4.99 ex. VAT
£5.99 inc. VAT
Calliper Cleaning File
Designed for removing corrosion, brake dust and road dirt from the brake pad carrier prior to fitting new pads. Double-sided blade features medium and coarse grooves.
£9.54 ex. VAT
£11.45 inc. VAT
Calliper Support Hook
Used to hold the brake calliper away from the hub when replacing brake pads. Simply hang the calliper hook onto a suitable suspension component to hold the calliper out of the way and also stop the weight of the calliper damaging the brake hose. Supplied with 2 brake calliper bolt retaining tags.
£4.48 ex. VAT
£5.38 inc. VAT
Cylinder Hone Kit 4-in-1
Four cylinder-honing tools in one kit covering 18mm to 89mm cylinder bores. Suitable for honing and de-glazing car brake and clutch cylinders plus motorcycle, outboard and lawnmower engine cylinders. Adjustable honing pressure and flexible drive shaft. Supplied in storage case.
£20.21 ex. VAT
£24.25 inc. VAT
Cylinder Hone Triple Leg Ø25-64mm 1-1/8" Medium...
Flexible drive shaft and adjustable cutting control. Fitted with 28.5mm(1-1/8") medium grade stones with adjustable capacity from Ø25-64mm. Suitable for small and medium sized brake cylinders.
£8.45 ex. VAT
£10.14 inc. VAT
Cylinder Hone Twin Leg Ø20-64mm 1-1/8" Medium S...
Flexible drive shaft and adjustable cutting control. Fitted with 28.5mm(1-1/8") medium grade stones with adjustable capacity from Ø20-64mm. Suitable for small brake cylinders.
£7.28 ex. VAT
£8.74 inc. VAT
Digital Brake Disc & Drum Calliper 150mm/6"
Measures disc thickness (external) and small drums (internal). Hardened and tempered stainless steel gauge. 11mm High figures in LCD display for ease of reading. Metric or Imperial read-out with Hold function. Zero setting control allows for comparative measurement. Supplied with calibration certificate and storage case.
£62.36 ex. VAT
£74.83 inc. VAT