Search Workshopping
Sort By: Sort Direction: Per Page
Adaptor Ø50 x 100mm
Sealey YAJ20B.12/4
Adaptor Ø50 x 100mm
Adaptor for YAJ20B (Ø x H) 50 x 100mm
RRP: £41.94
£24.32 ex. VAT
£29.18 inc. VAT
View more details
Adaptor Ø50 x 20mm
Sealey YAJ20B.12/2
Adaptor Ø50 x 20mm
Adaptor for YAJ20B (Ø x H) 50 x 20mm
RRP: £35.94
£21.55 ex. VAT
£25.86 inc. VAT
View more details
Adaptor Ø50 x 60mm
Sealey YAJ20B.12/3
Adaptor Ø50 x 60mm
Adaptor for YAJ20B (Ø x H) 50 x 60mm
RRP: £37.74
£22.63 ex. VAT
£27.16 inc. VAT
View more details
Adaptor Ø70 x 20mm
Sealey YAJ20B.12/1
Adaptor Ø70 x 20mm
Adaptor for YAJ20B (Ø x H) 70 x 20mm
RRP: £40.74
£23.63 ex. VAT
£28.36 inc. VAT
View more details
Adjustable Gearbox Support 300kg Capacity
Designed to safely support the gearbox on removal and installation from the vehicle. Adjustable saddle gives fine adjustment when aligning the gearbox to the engine. Suitable for any vertical transmission jack with a 30mm diameter shaft. Ideally suited for rear wheel drive cars and light commercial vehicles.
RRP: £107.94
£67.85 ex. VAT
£81.42 inc. VAT
View more details
Automotive Under Vehicle Support Stand (680kg)
Automotive support stand designed for under car components such as exhausts, sub frames, axles, differentials and prop-shafts etc. Raising and lowering is smoothly and simply controlled by the bearing mounted spin handle. Fitted with a removable base for easier storage.
RRP: £119.98
£88.96 ex. VAT
£106.75 inc. VAT
View more details
Nylon Wheel Kit For Stock No: 16407 Trolley Jack
Heavy-duty chassis fitted with a powerful twin piston 'quick-lift' feature. Large saddle aids positioning, integrated rubber saddle pad provides added protection to the vehicle. Available separately is a hardwearing Nylon wheel kit designed to prevent damage to showroom and garage floors. Safety valve prevents the jack from overloading. Supplied with a two piece handle and EVA foam bumper to protect vehicle panels.
RRP: £44.50
£20.24 ex. VAT
£24.29 inc. VAT
View more details
Pneumatic Tyres Set 2pc
For added manoeuvrability on uneven surfaces in and around the workshop for the heavier duty jacks. Suitable for use with specific models in the Sealey Premier Viking range.
RRP: £209.94
£129.11 ex. VAT
£154.93 inc. VAT
View more details
Rubber Saddle for Trolley Jacks 43929 and 43939
RRP: £21.89
£10.40 ex. VAT
£12.48 inc. VAT
View more details
Rubber Safety Jack Pad for 2500LE
Designed to prevent damage to the underside of the vehicle's jacking point.
RRP: £12.54
£8.15 ex. VAT
£9.78 inc. VAT
View more details
Saddle, Transmission Jack for 500GTA, 600TR, 600TRQ & 800GTA
Transmission jacks are ideal for other lifting tasks such as removal/installation of petrol tanks, exhausts, towing hooks, suspension components etc. Fits current models of vertical transmission jacks, 500GTA, 600TR, 600TRQ & 800GTA.
RRP: £45.54
£29.65 ex. VAT
£35.58 inc. VAT
View more details
Safety Rubber Jack Pad
Prevents damage to the vehicles jacking point.
RRP: £35.81
£20.24 ex. VAT
£24.29 inc. VAT
View more details
Safety Rubber Jack Pad
Added protection for jacking points on the vehicle. Fits specific models in the Sealey Premier Viking range. Models include 2001S, 2001LR, 1501HL, 2001HL and 3001LR.
RRP: £35.94
£23.86 ex. VAT
£28.63 inc. VAT
View more details
SEALEY 3000CXD/JP Rubber Safety Jack Pad for 3000CXD/3030CXD
Designed to prevent damage to the underside of the vehicle's jacking point.
RRP: £12.54
£5.80 ex. VAT
£6.96 inc. VAT
View more details
SEALEY 3000CXDHS EVA Jack Handle Sleeve 400mm x Ø30mm ID
Protective jack handle sleeve, helps prevent accidental damage to car body work when pumping the handle. Made from an EVA material which is oil resistant. Suitable for all jack handles with 30mm diameter.
RRP: £2.94
£2.35 ex. VAT
£2.82 inc. VAT
View more details
SEALEY ADT3 Adjustable Gearbox Support 500kg Capacity for 300TR, 300TRQ, 600TR, 600TRQ
A fully adjustable saddle with forward, backward and side-to-side tilt. Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600GA and ADT3 - Maximum capacity is 500kg.
RRP: £141.54
£86.49 ex. VAT
£103.79 inc. VAT
View more details
SEALEY ADT5 Adjustable Gearbox Support 1000kg Capacity for 1000ETJ, 1000TR, 1000TRQ, 1500TR
A fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for use with Model No's. 1000TR, 1000TRQ, 1500TR.
RRP: £239.94
£131.94 ex. VAT
£158.33 inc. VAT
View more details
SEALEY ADT7 Adjustable Gearbox Support 500kg Capacity for 300ETJ & 500ETJ
A fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for use with Model No's 300ETJ and 500ETJ.
RRP: £113.94
£71.18 ex. VAT
£85.42 inc. VAT
View more details
SEALEY HJO/500ML Hydraulic Jack Oil 500ml Pack of 12
Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes. N.B. Never use brake fluid to top up a hydraulic unit.
RRP: £112.74
£70.51 ex. VAT
£84.61 inc. VAT
View more details
SEALEY HJO/5L Hydraulic Jack Oil 5ltr Pack of 4
Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes. N.B. Never use brake fluid to top up a hydraulic unit.
RRP: £173.94
£95.65 ex. VAT
£114.78 inc. VAT
View more details
SEALEY HJO500MLS Hydraulic Jack Oil 500ml
Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes. N.B. Never use brake fluid to top up a hydraulic unit.
RRP: £10.56
£6.86 ex. VAT
£8.23 inc. VAT
View more details
SEALEY HJO5LS Hydraulic Jack Oil 5ltr
Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes. N.B. Never use brake fluid to top up a hydraulic unit.
RRP: £47.94
£27.80 ex. VAT
£33.36 inc. VAT
View more details
SEALEY SSP223 Safety Rubber Jack Pad for 3003CXQ
Designed to prevent damage to the underside of the vehicle's jacking point.
RRP: £18.90
£11.81 ex. VAT
£14.17 inc. VAT
View more details
SEALEY X136 Cross Beam Adaptor 2tonne
Provides extra safety when locating awkward jacking point. Ideal for front wheel drive vehicles. Suitable for jacks with a 31-33mm saddle spigot pin.
RRP: £100.14
£63.52 ex. VAT
£76.22 inc. VAT
View more details
SEALEY X137 Cross Beam Adaptor 3tonne 4x4
Clever device which quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials. Simply remove the existing trolley jack saddle, replace with cross beam adaptor, fit the jack saddle into the hole in the adaptor* (30mm spigot pin) and you are ready to lift. Suitable for jacks with a 30mm saddle spigot pin, including Model No's 3000CXD, 3003CXQ, 3010CX and 3012CXD. *Note: Remove any rubber jack pad from the saddle before using to improve safety.
RRP: £91.14
£56.18 ex. VAT
£67.42 inc. VAT
View more details
Basket Summary
+ VAT - VAT
Items : 0
P&P : Log in to view
Total : £0.00 exc. VAT
View BasketCheckout
Got a Question?
Answer this sum:
=
Sign up to our newsletter