Search Workshopping

Motorcycle Engine Tools

Specialist Motorbike Engine Tools can be found here. Other areas of interest may be Motorcycle Chain Products  or our range of Motorbike Workshop Tools. To view all our motorcycle products Click Here

Sort By: Sort Direction: Per Page
Clutch Locking Nut Removal Tool 20 & 24mm
Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch. Manufactured from heavy-duty heat treated steel. Suitable for use on Honda motorcycles with 20 or 24mm lock nuts.
RRP: £31.14
£17.11 ex. VAT
£20.53 inc. VAT
View more details
Double End Long Reach Spark Plug Box Spanner 14/16mm with L-Bar
14/16mm Double end, traditional style, long reach spark plug box spanner with L-bar.
RRP: £4.26
£2.56 ex. VAT
£3.07 inc. VAT
View more details
Double End Long Reach Spark Plug Box Spanner 16/18mm with L-Bar
16/18mm Double end, traditional style, long reach spark plug box spanner with L-bar.
RRP: £5.64
£3.39 ex. VAT
£4.07 inc. VAT
View more details
Double End Long Reach Spark Plug Box Spanner 16/21mm with L-Brace
16/21mm Double end, traditional style long reach spark plug box spanner with L-brace.
RRP: £6.18
£3.71 ex. VAT
£4.45 inc. VAT
View more details
Double End Long Reach Spark Plug Box Spanner 18/21mm with L-Bar
18/21mm Double end, traditional style, long reach spark plug box spanner with L-bar.
RRP: £4.98
£2.99 ex. VAT
£3.59 inc. VAT
View more details
Gudgeon Pin Remover - Motorcycle
Features interchangeable piston adaptors. One for full skirt pistons that makes 360° contact with the cylinder. Short skirt piston adaptor designed for use with slipper pistons. Supplied with 4 additional aluminium pin adaptors, for protecting the gudgeon pin. These four adaptors will allow the puller to work with any size gudgeon pin from 13mm to 24mm.
RRP: £59.94
£34.76 ex. VAT
£41.71 inc. VAT
View more details
Motorcycle Engine Stand - Single/Twin Cylinder
Suitable for lower capacity single and twin cylinder engines. Supports can rotate for accessibility to all parts of the engine. Useful integral utility/drip tray.
RRP: £105.54
£64.23 ex. VAT
£77.08 inc. VAT
View more details
Motorcycle Flywheel Puller
Designed with six different sized threaded adaptors for flywheel rings on motorcycles. Models with tapered lock type rings cannot be removed without the use of this specialised tool. Suitable for most types of motorcycle.
RRP: £31.74
£17.45 ex. VAT
£20.94 inc. VAT
View more details
Motorcycle Flywheel Puller Set 10pc
Comprehensive set of flywheel pullers used to separate flywheel from the crankshaft taper. Features ten pullers of which five have double end, giving increased applications. Suitable for most makes of motorcycle. Supplied in storage case.
RRP: £87.54
£53.81 ex. VAT
£64.57 inc. VAT
View more details
Motorcycle Locking Pulley Holder
Suitable for holding flywheels, clutches and pulleys during removal and installation. 8mm Pins on one side and flat blades on the other. Features locking adjustment screw to keep tool at required set size with quick release when finished.
RRP: £31.14
£17.11 ex. VAT
£20.53 inc. VAT
View more details
Motorcycle Piston Ring Compressing Tool Kit
Used to prevent piston ring damage while inserting pistons into the cylinder head. Easily removed when cylinder is in place. Tool supplied with four ring clamps ranging from Ø40-85mm. Will fit most engine sizes.
RRP: £29.94
£17.95 ex. VAT
£21.54 inc. VAT
View more details
Motorcycle Pulley Holder Ø45-120mm
Suitable for flywheel and clutch pulleys on a large range of motorcycles. Adjustable strap for use on different pulley sizes. Rotate handle so foot contacts against pulley to secure, to release rotate in the opposite direction. Vinyl dipped strap and foot gives added grip.
RRP: £32.34
£17.77 ex. VAT
£21.32 inc. VAT
View more details
Motorcycle Pulley Holder - Large Ø30-160mm
Suitable for flywheel and clutch pulleys on a large range of motorcycles. Adjustable strap for use on different pulley sizes up to Ø160mm . Rotate handle so foot contacts against pulley to secure, to release rotate in the opposite direction. Vinyl dipped strap and foot gives added grip.
RRP: £47.94
£27.80 ex. VAT
£33.36 inc. VAT
View more details
Motorcycle Stud Installation Tool
Aids fast installation of threaded studs without risk of damage to thread. Ideal for engine and exhaust studs. Operate using a 19mm spanner and a 5.5mm hex key.
RRP: £17.94
£8.75 ex. VAT
£10.50 inc. VAT
View more details
Motorcycle Valve Spring Compressor
Suitable for most motorcycle engines. Features two sizes of threaded adjusters for increased applications and five sizes of interchangeable jaws. Capacity: Ø50-170mm. Throat Depth: 120mm. Supplied in carry-case.
RRP: £58.74
£31.22 ex. VAT
£37.46 inc. VAT
View more details
Oil & Fluid Inspection Syringe 70ml
Multipurpose syringe with synthetic rubber seal, ideal for the transfer of oils/fluids to and from vehicle components. Compact size and flexible extension tube makes it ideal for use on motorcycles. Translucent body allows easy inspection of oils and fluids.
RRP: £9.96
£6.22 ex. VAT
£7.46 inc. VAT
View more details
Oil Filter Cap Wrench Ø65mm x 14 Flutes
Cap type filter wrench prevents damage to filter housing and will withstand up to 115Nm(85lb.ft) of torque. Low profile design suitable for use in confined areas.
RRP: £7.44
£4.18 ex. VAT
£5.02 inc. VAT
View more details
Oil Filter Cap Wrench Ø68mm x 14 Flutes
Cap type filter wrench prevents damage to filter housing and will withstand up to 115Nm(85lb.ft) of torque. Low profile design suitable for use in confined areas.
RRP: £7.44
£4.18 ex. VAT
£5.02 inc. VAT
View more details
Oil Filter Claw Wrench Ø43-102mm
Chrome polished carbon steel construction with 3/8" & 1/2"Sq drive. Also suitable for use with a 21mm spanner. Claws grip filter tighter as more torque is applied. Fits a range of popular motorcycle can filters ranging from 43 to 102mm.
RRP: £19.74
£11.31 ex. VAT
£13.57 inc. VAT
View more details
Pilot Screw Adjusting Tool
460mm Deep access tool, particularly suited to adjustment of motorcycle carburettors. 110° Angled head gives improved access to hard to reach areas. One turn of handle equals one turn of slotted blade. Blade tip height is adjustable allowing it to be set in place during operation.
RRP: £32.34
£17.77 ex. VAT
£21.32 inc. VAT
View more details
Piston Ring Compressor 50mm Ø38-83mm
Quality construction with sprung steel wrap and friction action tension mechanism. Ideal for small engine pistons. Supplied with steel key.
RRP: £22.14
£11.54 ex. VAT
£13.85 inc. VAT
View more details
Scooter Constantly Variable Transmission (CVT) Clutch Spring Tool 125mm
Specialised tool designed to compress the clutch assembly to aid the removal and installation of the torque spring on a scooter with CVT system. Manufactured from drop-forged steel. Suitable for use on CVT systems with 125mm pulleys.
RRP: £36.54
£16.43 ex. VAT
£19.72 inc. VAT
View more details
Spark Plug Box Spanner Set 3pc Long Reach Double End
Double end, traditional style, long reach spark plug box spanners with L-bar. Supplied in a pouch for safe storage
RRP: £9.54
£5.37 ex. VAT
£6.44 inc. VAT
View more details
Universal Motorcycle Pulley Holder
Pulley holder suitable for flywheel and clutch pulleys on a large range of motorcycles. Adjusting screw allows tool to be locked at the required size. PVC dipped handle gives added comfort and grip.
RRP: £30.54
£16.79 ex. VAT
£20.15 inc. VAT
View more details
Universal Motorcycle Pulley Holding Tool - 5.7 & 9.3mm Pins
Suitable for holding flywheels and pulleys during removal and installation. Two sizes of pins; 5.7mm one side and 9.3mm the other. Centre-to-Centre: 24-234mm. Features a locking adjustment screw to keep tool at required set size. PVC Dipped handles for extra grip and comfort when in use.
RRP: £22.74
£12.50 ex. VAT
£15.00 inc. VAT
View more details
Vacuum Oil & Fluid Extractor Manual 4ltr
4ltr Capacity device constructed from composite materials and suitable for the extraction of engine oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. Also suitable for low viscosity fluids such as water. Supplied with two suction probes - Ø10 x 1300mm & Ø5 x 1008mm & easy-pour spout and cover cap. Use probes to remove engine oil through the dipstick tube.
RRP: £46.14
£23.06 ex. VAT
£27.67 inc. VAT
View more details
Basket Summary
+ VAT - VAT
Items : 0
P&P : Log in to view
Total : £0.00 exc. VAT
View BasketCheckout
Got a Question?
Answer this sum:
=
Sign up to our newsletter